Uptime Monitoring - EasyAlert

Overview

Synthetics Uptime Monitoring lets you proactively detect outages and performance degradation before your users notice. Lightweight probe agents deployed across multiple global regions execute checks against your endpoints on a configurable schedule and report results back to EasyAlert. When a monitor detects a failure confirmed from multiple locations, an incident is created automatically, triggering your escalation policies and notifying the right people.

Multi-Protocol Checks

Monitor HTTP APIs, TCP ports, DNS records, ICMP ping, SSL certificates, and gRPC services

Global Probe Network

Run checks from distributed locations worldwide to detect regional issues

Smart Alerting

Multi-location confirmation prevents false positives from transient network blips

Detailed Analytics

Uptime percentages, response time charts, connection timing waterfall, and aggregated metrics

Monitor Types

EasyAlert supports six monitor types, each tailored to a different protocol or use case.

Monitor websites, REST APIs, and any HTTP/HTTPS endpoint.Best for: API health checks, website availability, webhook endpointsKey config fields:

HTTP method (GET, POST, PUT, etc.)
Custom headers and request body
Authentication (Basic, Bearer token)
Expected status codes (default: 200)
Body content assertions (contains string, regex match)
Maximum response time threshold (for degraded status)
Redirect following, HTTP version enforcement
Proxy support, HTTP/3 (QUIC), CEL expressions for JSON validation

Example:

Name: Production API Health
URL: https://api.example.com/health
Method: GET
Expected Status: 200
Body Contains: "status":"ok"
Max Response Time: 2000ms

Check that a TCP port is reachable and optionally validate the response to a sent payload.Best for: Database connectivity, custom services, mail servers, Redis/Memcached portsKey config fields:

Host and port
Send/expect strings (single-step)
Multi-step query/response sequences
TLS and STARTTLS support
Minimum TLS version enforcement

Example:

Name: PostgreSQL Primary
Host: db.example.com
Port: 5432
TLS: enabled

Verify DNS record resolution returns the expected values.Best for: DNS propagation monitoring, domain validation, DNSSEC verificationKey config fields:

Record type (A, AAAA, CNAME, MX, NS, TXT, CAA, SRV, SOA, PTR)
Custom nameserver
Expected values
DNSSEC validation
Transport protocol (UDP, TCP, DNS-over-TLS)
Response code validation (NOERROR, NXDOMAIN, etc.)
Answer/Authority/Additional section regex matching

Example:

Name: API DNS Record
Host: api.example.com
Record Type: A
Expected Values: ["203.0.113.10"]
Nameserver: 8.8.8.8

ICMP ping check for basic host reachability and latency measurement.Best for: Network connectivity, host reachability, latency baselinesKey config fields:

Payload size (0 – 65,500 bytes)
TTL (1 – 255)
Don’t Fragment flag

Example:

Name: Edge Server Ping
Host: edge-us.example.com
Payload Size: 56
TTL: 64

Monitor SSL/TLS certificate validity and expiration.Best for: Certificate expiry alerts, chain validation, TLS complianceKey config fields:

Alert days before expiry (default: 30)
Certificate chain validation
Minimum TLS version (TLSv1.2, TLSv1.3)

Example:

Name: Main Domain SSL
URL: https://example.com
Alert Days Before Expiry: 30
Check Chain: enabled
Min TLS Version: TLSv1.2

gRPC health check using the standard gRPC health checking protocol.Best for: Microservice health, gRPC endpoints, service mesh monitoringKey config fields:

Service name (empty for server-level check)
TLS enabled/disabled
Custom metadata key-value pairs

Example:

Name: Payment Service gRPC
Host: payments.internal.example.com
Port: 50051
Service: payment.PaymentService
TLS: enabled

Creating a Monitor

Open the Create Dialog

Navigate to Synthetics and click the New Monitor button.

Enter a Name

Give the monitor a descriptive name (e.g., “Production API Health Check”).

Select a Monitor Type

Choose from HTTP(S), TCP, DNS, Ping, SSL, or gRPC. The form updates to show type-specific fields.

Configure the Target

HTTP / SSL: Enter the full URL (e.g., https://api.example.com/health). If you omit the scheme, https:// is prepended automatically.
TCP / gRPC: Enter the host and port.
DNS / Ping: Enter the hostname.

Set Check Interval and Locations

Choose how often checks run (30 seconds to 30 minutes) and which probe locations to use. All online locations are selected by default.

Configure Type-Specific Settings

Expand the type-specific section to configure protocol details (HTTP headers, DNS record types, TCP send/expect, etc.).

Set Alert Settings

Configure the incident severity, number of confirmations required, and whether alert grouping is enabled.

Optional: Advanced Settings

Expand Advanced Options to configure SSL settings (for HTTP/SSL types), IP protocol preference, tags, and description.

Save

Click Create Monitor. The monitor begins checking on the next probe cycle.

Monitor Configuration

Check Intervals

Interval	Value	Recommendation
30 seconds	`30`	Critical production services requiring near-realtime detection
1 minute	`60`	Default. Good balance of speed and resource usage
2 minutes	`120`	Standard production monitoring
5 minutes	`300`	Non-critical services or high-volume environments
10 minutes	`600`	Background checks, cost-sensitive setups
30 minutes	`1800`	Low-priority endpoints, SSL expiry watches

Shorter intervals detect outages faster but generate more check data. Start with 1-minute intervals for production services and adjust based on your needs.

Probe Locations

Checks are executed from globally distributed probe agents. When creating or editing a monitor, all online probe locations are pre-selected. The Probe Globe in the toolbar provides a visual overview of available locations, their regions, and current status. Each probe location independently executes the check and reports results. This distributed approach helps you detect region-specific outages versus global failures.

Multi-Location Confirmation

The Confirmations setting controls how many locations must report failure before a status change is triggered.

Default: 2 confirmations
Range: 1 – 10 (limited by the number of selected locations)
If a location is offline, the threshold adjusts dynamically

Example: 3 locations, 2 confirmations

Setup: Monitor with locations us-east-1, eu-west-1, ap-southeast-1 and 2 confirmations.

Check cycle begins:
  us-east-1     → DOWN (connection timeout)
  eu-west-1     → DOWN (connection refused)
  ap-southeast-1 → UP (200 OK, 145ms)

Result: 2 of 3 locations report failure
        ≥ 2 confirmations required
        → Status changes to DOWN
        → Incident created

If only 1 location had failed, the monitor would remain UP — the failure is treated as a transient network issue.

Multi-location confirmation is the primary mechanism for preventing false-positive alerts. Always set confirmations to at least 2 when using multiple locations.

IP Protocol

Option	Behavior
Auto (default)	Let the probe resolve the address using the system’s default (typically IPv4)
IPv4	Force IPv4 resolution
IPv6	Force IPv6 resolution

When a specific protocol is selected, you can enable Protocol Fallback to try the opposite protocol if the preferred one fails to connect.

HTTP Configuration

Method & Headers

Method: GET (default), HEAD, POST, PUT, PATCH, DELETE, OPTIONS
Headers: Custom key-value pairs sent with every request
Compression: gzip, br, deflate, identity, or auto
Valid HTTP Versions: Restrict to HTTP/1.0, HTTP/1.1, or HTTP/2

Authentication

Basic Auth: Username and password
Bearer Token: Authorization header with a bearer token

Response Assertions

Expected Status Codes: List of acceptable HTTP status codes (default: [200])
Max Response Time: Threshold in milliseconds — responses exceeding this are marked degraded
SSL enforcement: failIfSsl / failIfNotSsl to enforce or reject HTTPS

Body Validation

Body Contains: Simple string match
Body Regex: Regular expression match
Fail If Body Matches: List of regex patterns — fail if body matches any
Body Size Limit: Maximum response body size in bytes
CEL Expressions: Common Expression Language rules for structured JSON body validation

TLS Settings

Follow Redirects: Enabled by default
Fail If SSL / Fail If Not SSL: Enforce HTTPS presence or absence

Advanced

Proxy URL: Per-check HTTP/SOCKS proxy
No Proxy: Comma-separated bypass list
HTTP/3 (QUIC): Enable experimental HTTP/3 support
Expected Headers: Key-value pairs the response must contain
Header regex matching: Fail-if-matches / fail-if-not-matches rules for response headers

TCP Configuration

Send / Expect: Single-step data exchange after connecting
Query/Response Steps: Multi-step sequences — each step sends data and expects a response
TLS: Wrap the connection with TLS from the start
STARTTLS: Upgrade a plain connection to TLS mid-stream
Minimum TLS Version: Enforce TLSv1.2 or TLSv1.3

DNS Configuration

Field	Description
Record Type	A, AAAA, CNAME, MX, NS, TXT, CAA, SRV, SOA, PTR
Nameserver	Custom DNS server to query (default: system resolver)
Expected Values	List of expected record values
DNSSEC Validation	Verify DNSSEC signatures
Transport Protocol	UDP (default), TCP, or DNS-over-TLS (DoT)
Valid RCodes	Acceptable response codes (NOERROR, NXDOMAIN, etc.)
Query Class	IN (default), CS, CH, HS
Recursion Desired	Request recursive resolution (default: true)

Advanced regex matching is available for answer, authority, and additional sections.

SSL Configuration

Field	Default	Description
Alert Days Before Expiry	30	How many days before expiry to trigger a warning
Check Chain	true	Validate the full certificate chain
Minimum TLS Version	—	Enforce TLSv1.2 or TLSv1.3

SSL configuration is available for both HTTP and SSL monitor types. For HTTP monitors, it appears under Advanced Options.

Ping Configuration

Field	Default	Description
Payload Size	System default	ICMP payload size in bytes (0 – 65,500)
TTL	System default	Time-to-live / hop limit (1 – 255)
Don’t Fragment	false	Set the DF bit to prevent fragmentation

gRPC Configuration

Field	Default	Description
Service	(empty)	gRPC service name. Empty means server-level health check
TLS	false	Enable TLS for the gRPC connection
Metadata	—	Custom key-value metadata pairs sent with the health check

Monitor Status

Every monitor has one of seven statuses:

Status	Color	Description
Up	Emerald	All checks passing. Service is healthy
Down	Red	Confirmed failure from multiple locations. Incident created
Degraded	Amber	Service responding but exceeding performance thresholds
Pending	Blue	Monitor just created, waiting for first check results
Paused	Gray	Monitoring temporarily suspended by user
Maintenance	Amber	Inside a scheduled maintenance window
Unknown	Gray	Status cannot be determined (e.g., all probes offline)

Status Transitions

                    ┌─────────┐
     Created ──────→│ Pending │
                    └────┬────┘
                         │ first check
                         ▼
                    ┌─────────┐
              ┌────→│   Up    │◄────┐
              │     └────┬────┘     │
              │          │          │ recovery
              │   failure confirmed │
              │          ▼          │
              │     ┌─────────┐    │
              │     │  Down   │────┘
              │     └─────────┘
              │
              │     ┌──────────┐
              ├────→│ Degraded │ (threshold exceeded but reachable)
              │     └──────────┘
              │
   user action│     ┌──────────┐
              ├────→│  Paused  │ (user paused monitoring)
              │     └──────────┘
              │
  maintenance │     ┌─────────────┐
  window      └────→│ Maintenance │ (inside scheduled window)
                    └─────────────┘

How Status Is Evaluated

Probes independently execute checks at the configured interval
Each check result is recorded with status up, down, degraded, or error
If enough locations report failure (≥ confirmations), the monitor transitions to Down
If a check exceeds the maxResponseTime threshold (HTTP), the check is marked Degraded
When recovery is detected across locations, the monitor transitions back to Up

Viewing Monitors

Monitor List

The Synthetics page shows all your monitors in a searchable, paginated table:

Column	Description
Status	Current monitor status badge (Up, Down, Degraded, etc.)
Name	Monitor name and target URL/host
Type	Protocol badge (HTTP, TCP, DNS, Ping, SSL, gRPC)
Response	Last recorded response time in milliseconds
Uptime (24h)	Rolling 24-hour uptime percentage
Interval	Check frequency
Last Check	Timestamp of the most recent check
Actions	View, Edit, Pause/Resume, Delete

Stats Cards

At the top of the list, summary cards show:

Total Monitors — count of all monitors
Up — monitors currently healthy
Down — monitors currently failing
Degraded — monitors with performance issues
Paused — monitors that are suspended

Filtering and Search

Search: Filter monitors by name
Status Filter: Show only monitors with a specific status (Up, Down, Degraded, Paused, Pending)
Type Filter: Show only monitors of a specific protocol (HTTP, TCP, DNS, Ping, SSL, gRPC)

Monitor Detail

Click any monitor to open its detail page with rich analytics and configuration views. Header area displays the monitor name, status badge, type badge, target URL/host, and action buttons (Run Now, Pause/Resume, Edit, Delete). If the monitor has an active incident, a banner links directly to it. Quick stats cards show:

Uptime percentage for the selected period
Current response time
Number of probe locations
Total checks in the period

Uptime bar visualizes status changes over time with period selectors (24h, 7d, 30d, 90d). Tabs:

Overview
Checks
Status Changes
SSL
Maintenance

Response Time Chart — time series of response times
Connection Timing Waterfall — per-phase breakdown (DNS, TCP, TLS, Server, Content Transfer). HTTP monitors only
Aggregate Metrics — hourly/daily/monthly summary with percentiles
Location Status — per-location check results
Configuration — check interval, timeout, confirmations, severity

Uptime Analytics

Uptime Percentage

Select a period using the buttons in the uptime card header:

Period	Description
24h	Last 24 hours
7d	Last 7 days
30d	Last 30 days
90d	Last 90 days

Uptime is calculated based on status changes, not individual check counts. This means short-lived failures that don’t trigger a status change won’t affect the uptime percentage. The Uptime Bar provides a visual timeline of status changes in the selected period. Each colored segment represents a period where the monitor was in a specific status.

Response Time

The response time chart shows average, minimum, and maximum response times over the selected period. Data points are bucketed by time based on the period:

Period	Bucket Size
24h	~15 minutes
7d	~1 hour
30d	~6 hours
90d	~1 day

You can filter response time data by a specific probe location.

Response Timings (HTTP Only)

For HTTP monitors, the Connection Timing Waterfall breaks down each request into its constituent phases:

Phase	Description
DNS Lookup	Time to resolve the hostname to an IP address
TCP Connect	Time to establish the TCP connection
TLS Handshake	Time to complete the TLS handshake (HTTPS only)
Server Processing	Time from request sent to first byte received
Content Transfer	Time to download the full response body

Use the waterfall to identify bottlenecks. A slow DNS phase might indicate resolver issues, while high server processing suggests backend problems.

Aggregated Metrics

The Aggregate Metrics card shows summarized data at hourly, daily, or monthly granularity:

Total / Success / Failed / Degraded check counts
Response time percentiles: p50, p95, p99
Average / Min / Max response time
Uptime percentage per period
Downtime in seconds
Per-location breakdown via location metrics

Check History

The Checks tab provides a paginated table of every individual check result:

Filter by location or status
Columns: Location, Status, Response Time, Status Code, Error Message, Timestamp
Configurable page size (10, 20, 50, 100)

Status Changes

The Status Changes tab shows a timeline of every transition:

From → To status with color indicators
Reason for the change
Duration in the previous state (e.g., “was 2h 15m in Up”)
Linked Incident — click to navigate to the incident

Maintenance Windows

Maintenance windows let you schedule periods where status changes won’t trigger incident alerts. Checks continue to run during maintenance, but the monitor’s status is set to Maintenance.

Creating a Maintenance Window

Open the Maintenance Tab

Navigate to the monitor’s detail page and select the Maintenance tab.

Click Schedule

Click the Schedule button to open the creation dialog.

Enter Details

Title — descriptive name (e.g., “Database Migration”)
Description — optional details
Start — date and time when maintenance begins
End — date and time when maintenance ends

Save

Click Schedule to create the maintenance window.

Behavior During Maintenance

Checks continue to run — results are still recorded
Status changes do not trigger incidents or alerts
The monitor status shows as Maintenance in the UI
When the window ends, normal alerting resumes automatically

Managing Windows

Each maintenance window shows:

Title and description
Start and end times
Active badge if currently in effect
Past badge if the window has ended
Recurrence indicator if the window repeats

To delete a window, click the trash icon and confirm.

Deleting an active maintenance window immediately resumes normal alerting. Any status changes that occur after deletion will trigger incidents as usual.

Incident Integration

Automatic Incident Creation

When a monitor transitions to Down, EasyAlert automatically:

Creates an incident with the configured severity (critical, high, medium, or low)
Links the incident to the monitor
Triggers the assigned escalation policy
Displays a banner on the monitor detail page linking to the incident

Alert Grouping

When Alert Grouping is enabled (default), subsequent failures from the same monitor are grouped into the existing open incident rather than creating new ones. This prevents incident spam during extended outages.

Automatic Resolution

When a monitor recovers (transitions back to Up), the linked incident is automatically resolved. The resolution note includes downtime duration information.

SSL Certificate Monitoring

For HTTP and SSL monitor types, EasyAlert tracks SSL certificate information:

Issued To — the domain the certificate covers
Issuer — the certificate authority
Expires At — expiration date
Days Until Expiry — countdown to expiration
Certificate Chain — full chain validation
Serial Number / Fingerprint / Protocol — detailed certificate metadata

Expiry Alerts

Configure the Alert Days Before Expiry setting (default: 30 days) to receive warnings before a certificate expires. The SSL configuration also supports enforcing a minimum TLS version.

SSL certificate data is collected during regular checks and cached on the monitor. View it in the SSL tab on the monitor detail page.

Bulk Operations

The monitor list supports multi-select for bulk actions:

Use the checkbox column to select monitors (available for users with write permission)
A bulk action bar appears showing the count of selected monitors
Available actions:
- Bulk Pause — pause all selected monitors
- Bulk Resume — resume all selected monitors
Maximum 100 monitors per bulk operation

You can also trigger an immediate check using Run Now from the monitor detail page. This queues the check for the next probe cycle.

Data Retention

Data Type	Retention
Individual checks	30 days
Hourly aggregates	90 days
Daily aggregates	1 year
Monthly aggregates	Indefinite
Status changes	Indefinite

Best Practices

Use Multiple Locations

Always monitor from at least 2-3 locations. This enables multi-location confirmation and helps distinguish between regional and global outages.

Set Appropriate Confirmations

Use at least 2 confirmations to avoid false positives from transient network issues. For critical services with many locations, consider 3 or more.

Match Interval to Criticality

Critical services: 30s – 1 minute
Standard production: 2 – 5 minutes
SSL expiry / low-priority: 10 – 30 minutes

Use Body Assertions for HTTP

Don’t just check for a 200 status code. Add a body assertion (e.g., "status":"ok") to verify the application is actually healthy, not just returning a generic error page.

Schedule Maintenance Windows for Deployments

Before deploying changes that might cause brief downtime, schedule a maintenance window. This prevents noisy incident alerts during planned work.

Monitor SSL Expiry Proactively

Set the alert days before expiry to at least 30 days. This gives you enough time to renew certificates before they cause outages.

Use Tags for Organization

Apply key-value tags to monitors for grouping and filtering (e.g., environment: production, team: platform).

Review Response Timing Waterfall

For HTTP monitors, regularly check the waterfall breakdown. A sudden increase in DNS lookup time or TLS handshake time can indicate infrastructure issues before a full outage occurs.

Common Patterns

Website Monitoring

Type: HTTP URL: https://www.example.com Method: GET Expected Status: 200 Body Contains: A unique string from the homepage Interval: 1 minute Confirmations: 2

API Health Check

Type: HTTP URL: https://api.example.com/health Method: GET Expected Status: 200 Body Contains: "status":"ok" Max Response Time: 2000ms Interval: 30 seconds Confirmations: 2

SSL Expiry Watch

Type: SSL URL: https://example.com Alert Days Before Expiry: 30 Check Chain: enabled Interval: 30 minutes Confirmations: 1

Database Connectivity

Type: TCP Host: db.example.com Port: 5432 TLS: enabled Interval: 2 minutes Confirmations: 2

DNS Propagation

Type: DNS Host: api.example.com Record Type: A Expected Values: ["203.0.113.10"] Nameserver: 8.8.8.8 Interval: 5 minutes Confirmations: 2

Multi-Region Redundancy

Create separate monitors for the same service targeting different regions:

US Monitor: Locations us-east-1, us-west-2 — 30s interval
EU Monitor: Locations eu-west-1, eu-central-1 — 30s interval
APAC Monitor: Locations ap-southeast-1, ap-northeast-1 — 30s interval

Use different escalation policies per region to route alerts to the right team.

Troubleshooting

Monitor stuck in Pending status

Verify that at least one probe location is online (check the Probe Globe)
Confirm the target URL/host is correct and accessible from the internet
Check that the monitor is not paused
Wait for the first check cycle to complete (up to 1 interval)

False positives (Down alerts when service is up)

Increase the confirmations count to 2 or 3
Add more probe locations for better confirmation coverage
Check if a firewall or WAF is blocking probe IPs
For HTTP monitors, verify expected status codes include all valid responses (e.g., add 301 if redirects are expected)

Monitor shows Degraded but service seems fine

Check the maxResponseTime threshold — it may be set too aggressively
Review the Response Timing Waterfall to identify which phase is slow
Consider that network latency between the probe location and your server affects total response time
Try filtering response time data by specific locations to find slow regions

SSL certificate not showing

Ensure the monitor type is HTTP or SSL
Wait for at least one successful check to complete
Verify the target URL uses HTTPS
Check that the server is presenting a valid certificate

Checks running but no status changes recorded

This is normal if the service is consistently healthy — status changes only appear on transitions
Check the Checks tab to verify individual check results are being recorded
Verify the confirmations threshold isn’t higher than the number of failing locations

Maintenance window not preventing alerts

Verify the maintenance window times are correct (check timezone)
Confirm the window’s start time has actually passed
Ensure the window was created for the correct monitor
Check that the window hasn’t already ended

Bulk operations not available

Bulk actions require write permission on synthetics
The checkbox column only appears for users with write access
Select at least one monitor to see the bulk action bar
Maximum 100 monitors can be selected per bulk operation

Response time spikes in specific locations

Filter the Response Time chart by the affected location
Compare with other locations to determine if the issue is regional
Check the Connection Timing Waterfall (HTTP) to identify the slow phase
Consider adding a monitor from a nearby location for comparison

Quick Reference

Monitor Types

Type	Target	Key Use Case
HTTP(S)	URL	APIs, websites, webhooks
TCP	Host:Port	Database, Redis, custom services
DNS	Hostname	DNS records, propagation
Ping	Hostname	Network reachability, latency
SSL	URL	Certificate expiry, TLS compliance
gRPC	Host:Port	Microservice health checks

Check Intervals

Interval	Seconds	Best For
30 seconds	30	Critical production
1 minute	60	Standard production
2 minutes	120	General monitoring
5 minutes	300	Non-critical services
10 minutes	600	Background checks
30 minutes	1800	SSL expiry, low priority

Status Meanings

Status	Triggers Incident	Checks Run
Up	No	Yes
Down	Yes	Yes
Degraded	No	Yes
Pending	No	Yes (waiting for first result)
Paused	No	No
Maintenance	No	Yes (alerts suppressed)
Unknown	No	Varies

Default Settings

Setting	Default Value
Check Interval	60 seconds (1 minute)
Timeout	30 seconds
Confirmations	2
Severity	High
Alert Grouping	Enabled
IP Protocol	Auto
Protocol Fallback	Enabled
SSL Alert Days	30
SSL Check Chain	Enabled
HTTP Method	GET
HTTP Expected Status	200
HTTP Follow Redirects	Enabled
DNS Record Type	A
DNS Transport	UDP
DNS Recursion	Enabled

​Overview

Multi-Protocol Checks

Global Probe Network

Smart Alerting

Detailed Analytics

​Monitor Types

​Creating a Monitor

​Monitor Configuration

​Check Intervals

​Probe Locations

​Multi-Location Confirmation

​IP Protocol

​HTTP Configuration

​TCP Configuration

​DNS Configuration

​SSL Configuration

​Ping Configuration

​gRPC Configuration

​Monitor Status

​Status Transitions

​How Status Is Evaluated

​Viewing Monitors

​Monitor List

​Stats Cards

​Filtering and Search

​Monitor Detail

​Uptime Analytics

​Uptime Percentage

​Response Time

​Response Timings (HTTP Only)

​Aggregated Metrics

​Check History

​Status Changes

​Maintenance Windows

​Creating a Maintenance Window

​Behavior During Maintenance

​Managing Windows

​Incident Integration

​Automatic Incident Creation

​Alert Grouping

​Automatic Resolution

​SSL Certificate Monitoring

​Expiry Alerts

​Bulk Operations

​Data Retention

​Best Practices

​Common Patterns

​Troubleshooting

​Quick Reference

​Monitor Types

​Check Intervals

​Status Meanings

​Default Settings

Overview

Monitor Types

Creating a Monitor

Monitor Configuration

Check Intervals

Probe Locations

Multi-Location Confirmation

IP Protocol

HTTP Configuration

TCP Configuration

DNS Configuration

SSL Configuration

Ping Configuration

gRPC Configuration

Monitor Status

Status Transitions

How Status Is Evaluated

Viewing Monitors

Monitor List

Stats Cards

Filtering and Search

Monitor Detail

Uptime Analytics

Uptime Percentage

Response Time

Response Timings (HTTP Only)

Aggregated Metrics

Check History

Status Changes

Maintenance Windows

Creating a Maintenance Window

Behavior During Maintenance

Managing Windows

Incident Integration

Automatic Incident Creation

Alert Grouping

Automatic Resolution

SSL Certificate Monitoring

Expiry Alerts

Bulk Operations

Data Retention

Best Practices

Common Patterns

Troubleshooting

Quick Reference

Monitor Types

Check Intervals

Status Meanings

Default Settings